Saturn 3

£289.99 GBP £219.99 GBP
Shipping calculated at checkout.

  • 10-inch 12K Mono LCD
  • Laser-carved Build Plate
  • XY Resolution of 19×24μm
  • COB + Fresnel Collimating Lens
  • Build Volume of 218.88×122.88×250 mm³
  • Free Shipping
  • 1-Year Warranty
  • 14 Days Return
  • Lifetime Support
Product information

Where We Ship

Orders placed on ELEGOO UK (uk.elegoo.com) can be shipped to United Kingdom, Jersey and Guernsey.

Estimated Delivery Time:

In-stock Product: 3-7 workdays for delivery.

Pre-owned Product: 4-14 workdays for delivery.

Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.


Shipping Restrictions

  • Please note that we are unable to ship to P.O. Boxes, BFPO addresses and Bermuda.
  • Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees:

Category

Condition

Shipping Fee

Standard Shipping

Orders of £40 or more

Free

Orders under £40

£11.9 flat rate

Exceptions

Saturn 4 Ultra 16K

£16 per unit

Centauri Series

(Centauri, Centauri Carbon)

£20 per unit

 

For orders shipped to the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

Warranty Policy

1. Warranty timeline

 

Models
Parts List
Note
Warranty Period
3D Printing Machine & Parts
Neptune 3/3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

Centauri Carbon/Centauri
PEI Platform Plate/PEI Platform Kit/PEI Magnetic Platform Kit/Build Plate
The PEI platform/build plate is a consumable product without warranty.
No warranty
Nozzle
The nozzle kit is a consumable product without warranty.
No warranty
PTFE Tube
The PTFE tube is a consumable product without warranty.
No warranty
Heater, Thermistor, Tools
No warranty
Hot End/Hotend Kit
The nozzle and PTFE tube are consumable products without warranty.
3 Months
Extruder/Extruder Kit/Printhead Kit
6 Months
Cooling Fan Kit
This includes the 4010/4015 blower fan and the 6010 axial flow fan.
12 Months
STM 32-bit Silent Motherboard
12 Months
Main Parts of the Machine
12 Months
Mars/Jupiter
Release Film, Tools
The release film is a consumable product without warranty.
No warranty
LCD Screen
Resin leakage, scratch-resistant film damage, human damage, and collision damage are not included in the warranty.
3 Months
Resin Tank
Installation tools and screws are not warranted.
6 Months
Build Plate
Damage caused by scratches, drops, or bumps is not covered by the warranty.
6 Months
Other Main Parts of the Machine
12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K

Jupiter SE
Release Film, Tools
The release film is a consumable product without warranty.
No warranty
LCD Screen
Resin leakage, scratch-resistant film damage, human damage, and collision damage are not included in the warranty.
6 Months
Resin Tank
Installation tools and screws are not warranted.
6 Months
Build Plate
Damage caused by scratches, drops, or bumps is not covered by the warranty.
6 Months
Other Main Parts of the Machine (FEP & Tools Excluded)
12 Months
Mercury 
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Washing Bucket, Curing Turntable, Acrylic Cover
No warranty
Other Main Parts of the Machine (Tools Excluded)
No warranty for the Fresnel lens coated with resin.
12 Months
Phecda Laser
Engraver & 
Cutter - 10W/20W
Consumables and
Other attached
Window Mirror,Power Cord, USB Cable, Engraving Materials, User Manual, Packaging, Tools
No warranty
Other Parts①
Synchronous Belt, Motor Connection Line, Laser Connection Line
3 Months
Other Parts②
Fans
6 Months
Main Parts①
Laser Head
The rate of laser power drop is related to the frequency of use, working hours, and the working environment. If the laser head has any obvious appearance defects or visible cracks, after-sales warranty services will not be provided.
12 Months
Main Parts②
Air Assist, PCB, Motor, Laser Head, Power Adapter, Raisers
12 Months
Arduino Kits, Robot Kits & Component Kits
All
All
12 Months
Pre-owned Products
All
All
No warranty
Accessories
Air Purifier:
Mini/USB/Mars Mate
All (Activated Carbon Excluded)
Consumables (activated carbon) are not warranted, nor is human damage or disassembly covered by the warranty.
12 Months
Mini Heater
All (Activated Carbon Excluded)
12 Months
3D Stainless Steel Funnel
3D Stainless Steel Funnel is a consumable product without warranty
No warranty
3D Paint Kit
All
No warranty
PEI Liquid Glue
All
No warranty
Anti-Vibration Feet
All
12 Months
Enclosure
All
12 Months
Dual Printhead Mounting Plate
All
12 Months
Four-Printhead Mounting Plate
All
12 Months
5 kg Large Spool Holder Kit
All
12 Months
Camera
All
12 Months
Filament Vacuum Storage Bags Kit
Pump (Vacuum Bags Excluded)
The vacuum bags are consumable products without warranty.
1 Month
Accessories for Phecda
Honeycomb Panel
The honeycomb panel is a consumable product without warranty.
No warranty
Composite Filter
The composite filter is a consumable product without warranty.
No warranty
Rotary Attachment
12 Months
Enclosure
12 Months
Metal Business Cards
All
No warranty
Silicone Mat
All
No warranty

 

2. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

 

3. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:
A. Product is not from ELEGOO or distributors authorized by ELEGOO
B. Products without purchase receipt or any other sufficient proofs of purchase
C. Lost or stolen products
D. Items that have expired their warranty period
E. Non-quality-related issues (after 30 days of purchase)
F. Free products
G. Repaired by a third party or modified by an individual
H. Damage from outside sources
I. Damage from misuse of products (including, but not limited to: resin leakage, falls, and operating devices improperly)
J. Normal discoloration, wear, or consumption during product use
K. The LCD screen cannot provide an SN code

 

Return & Refund Policy

1. For Unwanted Items

*This clause does not apply to Pre-owned & Refurbished items.

Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we refer to such a product as an "unwanted product".

A. For unopened products (with all original tags and labels attached), you can return them within 14 days of delivery for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.

B. For open-box and unused products, within 14 days of delivery, you can return them for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.

C. For used products or orders beyond 14 days, refunds for unwanted products are not available.

Unwanted Issue

 

Product Status

Items

Responsibility of Both Original Shipping Charges and Return Shipping Charges

Restocking Fee

Deduction Fee

Refund

Within 14 Days

Unopened

Customer

5% based on the order amount

If the returned machine detects key parts missing, the corresponding fees will be deducted.

Open-box and unused

Customer

15% based on the order amount

Used

×

×

×

Within Warranty

All Status

×

×

×

×


Important:

1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.

2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

3. The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo's sole discretion.

2. For Quality-Related Items

*This clause does not apply to Pre-owned & Refurbished items.

Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.

A. Product is defective when you receive it, within 14 days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

B. Beyond the 14 days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

Quality-Related Issue

 

Items

Responsibility of Fees

Refund

Replace

Repair

Return Shipping Charges

Repair Fees

Within 14 Days

Elegoo

Elegoo

Within Warranty

×

×

×

Elegoo

Out of Warranty

×

×

×

Customer

 

Important:

1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.

2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

3. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

3. Process After Returning Product

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

 

Contact Us

Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

  1. For 3D Printer technical support: 3dp@elegoo.com

  2. For laser engraver technical support: lec@elegoo.com

  3. For order issues, unwanted item refunds, or returns: info@elegoo.com

  4. For STEM kits, robots technical support: service@elegoo.com

When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

12K Printing Accuracy

ELEGOO Saturn 3 adopts a 10-inch 12K mono LCD with a resolution of 11520x5120 and an XY resolution of 19x24 microns, which allows for the production of intricate models with excellent details and exceptional sharpness. The replaceable 9H tempered glass effectively prevents scratches and damage to the LCD screen and prolongs its lifespan.

COB + Fresnel Collimating Lens

The COB light source paired with Fresnel collimating lens ensures a more perpendicular and uniform exposure across the screen, within a 5-degree light angle & 0.5% light-scattering coefficient, and 90% light uniformity, allowing you to print truly impressive models with smooth surfaces and sharp edges.

Upgraded Heat Dissipation System

The upgraded heat dissipation system includes 6 double heat-conducting copper tubes and 4 cooling fans on both sides of the light source for faster ventilation and better heat dissipation. This ensures that your printer is working at its best, prolonging its lifespan.

The dual linear guide rail design ensures that the Z-axis movement is quieter, more stable, and precise, reducing riffles on final prints.

The laser-carved build plate with excellent adhesion ensures that your prints stick to the build plate even when printing large models.

The non-slip hexagon socket leveling screws are designed for easy handling, making leveling fast and easy.

The printer's mid-plate is designed with a raised step to prevent resin from flowing inside the printer, keeping your machine components safe and clean.

The Voxeldance Tango software is designed to improve your printing efficiency, offering static mode and dynamic printing mode (dynamic mode including smooth mode and high-speed mode). With the open-source GOO slice file format, you can use third-party slicing software, such as CHITUBOX and Lychee Slicer, for added flexibility and convenience.

Your printing safety is our concern, which is why we've included an upgraded USB-powered air purifier, with a plastic protective case to effectively protect the built-in activated carbon filter from damage and breakage during transportation. For extra peace of mind, you can also opt for the upcoming ELEGOO Mars MATE air purifier, which can remove up to 95% of VOCs for a safe and comfortable workspace.

What's In Box

Specification

LCD

10-inch 12K Mono LCD

System

EL3D-3.0.1

Slicer Software

Chitu Box, Voxeldance Tango & Autodesk Fusion

Technology

MSLA Stereolithography

Layer Thickness

0.01-0.2mm

Printing Speed

MAX 70mm/h

Z Axis Accuracy

0.02mm

XY Resolution

19x24μm(11520x5120)

Build Volume

218.88 x 122.88 x 250 mm³

Light Source

COB (wavelength 405nm)

Languages

Chinese, English

Connectivity

USB Interface

OPERATING SCREEN

3.5-inch Touch Screen

Power Requirements

100-240V 50/60Hz 24V 4A

Dimensions

305.9 x 273 x 567.3 mm³

AIR PURIFIER

Plug-in

HEAT DISSIPATION METHOD

6 copper heat pipes + 4 fans

RESIN

Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)

LCD SCREEN PROTECTOR

9H hardness tempered glass

NET WEIGHT

11kg

GROSS WEIGHT

15.2kg

Show More(15+)
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer

FAQs

How long does delivery take after shipping?

1. In-stock Product: 3-7 workdays for delivery

2. Pre-owned Product: 4-8 workdays for delivery

3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

What countries do you ship to?

Click to view available countries

Do you offer free shipping service?

Orders over £40 qualify for FREE SHIPPING. Orders under £40 will incur a delivery fee of £11.90.

For orders shipped to the United Kingdom, we are responsible for paying customs duties.

Can I change the delivery address of my package after it has been shipped out?

Unfortunately, we cannot change the shipment once the product is shipped.