Saturn 4 Ultra

£443.99 GBP £354.99 GBP
Shipping calculated at checkout.

  • Innovative Tilt Release Technology
  • 10-inch 12K Mono LCD
  • COB + Fresnel Collimating Lens
  • Auto Leveling & Intelligent Mechanical Sensor
  • AI Intelligent Monitoring & Power-Loss Resume Printing
  • 1-Year Warranty
  • 14 Days Return
  • Lifetime Support
Product information

Where We Ship

Orders placed on ELEGOO UK (uk.elegoo.com) can be shipped to United Kingdom, Jersey and Guernsey.

Estimated Delivery Time:

In-stock Product: 3-7 workdays for delivery.

Pre-owned Product: 4-14 workdays for delivery.

Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays.


Shipping Restrictions

  • Please note that we are unable to ship to P.O. Boxes, BFPO addresses and Bermuda.
  • Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees:

Category

Condition

Shipping Fee

Standard Shipping

Orders of £40 or more

Free

Orders under £40

£11.9 flat rate

Exceptions

Saturn 4 Ultra 16K

£16 per unit

Centauri Series

(Centauri, Centauri Carbon)

£20 per unit

 

For orders shipped to the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

Warranty Policy

1. Warranty timeline

 

Models
Parts List
Note
Warranty Period
3D Printing Machine & Parts
Neptune 3/3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

Centauri Carbon/Centauri
PEI Platform Plate/PEI Platform Kit/PEI Magnetic Platform Kit/Build Plate
The PEI platform/build plate is a consumable product without warranty.
No warranty
Nozzle
The nozzle kit is a consumable product without warranty.
No warranty
PTFE Tube
The PTFE tube is a consumable product without warranty.
No warranty
Heater, Thermistor, Tools
No warranty
Hot End/Hotend Kit
The nozzle and PTFE tube are consumable products without warranty.
3 Months
Extruder/Extruder Kit/Printhead Kit
6 Months
Cooling Fan Kit
This includes the 4010/4015 blower fan and the 6010 axial flow fan.
12 Months
STM 32-bit Silent Motherboard
12 Months
Main Parts of the Machine
12 Months
Mars/Jupiter
Release Film, Tools
The release film is a consumable product without warranty.
No warranty
LCD Screen
Resin leakage, scratch-resistant film damage, human damage, and collision damage are not included in the warranty.
3 Months
Resin Tank
Installation tools and screws are not warranted.
6 Months
Build Plate
Damage caused by scratches, drops, or bumps is not covered by the warranty.
6 Months
Other Main Parts of the Machine
12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K

Jupiter SE
Release Film, Tools
The release film is a consumable product without warranty.
No warranty
LCD Screen
Resin leakage, scratch-resistant film damage, human damage, and collision damage are not included in the warranty.
6 Months
Resin Tank
Installation tools and screws are not warranted.
6 Months
Build Plate
Damage caused by scratches, drops, or bumps is not covered by the warranty.
6 Months
Other Main Parts of the Machine (FEP & Tools Excluded)
12 Months
Mercury 
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Washing Bucket, Curing Turntable, Acrylic Cover
No warranty
Other Main Parts of the Machine (Tools Excluded)
No warranty for the Fresnel lens coated with resin.
12 Months
Phecda Laser
Engraver & 
Cutter - 10W/20W
Consumables and
Other attached
Window Mirror,Power Cord, USB Cable, Engraving Materials, User Manual, Packaging, Tools
No warranty
Other Parts①
Synchronous Belt, Motor Connection Line, Laser Connection Line
3 Months
Other Parts②
Fans
6 Months
Main Parts①
Laser Head
The rate of laser power drop is related to the frequency of use, working hours, and the working environment. If the laser head has any obvious appearance defects or visible cracks, after-sales warranty services will not be provided.
12 Months
Main Parts②
Air Assist, PCB, Motor, Laser Head, Power Adapter, Raisers
12 Months
Arduino Kits, Robot Kits & Component Kits
All
All
12 Months
Pre-owned Products
All
All
No warranty
Accessories
Air Purifier:
Mini/USB/Mars Mate
All (Activated Carbon Excluded)
Consumables (activated carbon) are not warranted, nor is human damage or disassembly covered by the warranty.
12 Months
Mini Heater
All (Activated Carbon Excluded)
12 Months
3D Stainless Steel Funnel
3D Stainless Steel Funnel is a consumable product without warranty
No warranty
3D Paint Kit
All
No warranty
PEI Liquid Glue
All
No warranty
Anti-Vibration Feet
All
12 Months
Enclosure
All
12 Months
Dual Printhead Mounting Plate
All
12 Months
Four-Printhead Mounting Plate
All
12 Months
5 kg Large Spool Holder Kit
All
12 Months
Camera
All
12 Months
Filament Vacuum Storage Bags Kit
Pump (Vacuum Bags Excluded)
The vacuum bags are consumable products without warranty.
1 Month
Accessories for Phecda
Honeycomb Panel
The honeycomb panel is a consumable product without warranty.
No warranty
Composite Filter
The composite filter is a consumable product without warranty.
No warranty
Rotary Attachment
12 Months
Enclosure
12 Months
Metal Business Cards
All
No warranty
Silicone Mat
All
No warranty

 

2. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

 

3. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:
A. Product is not from ELEGOO or distributors authorized by ELEGOO
B. Products without purchase receipt or any other sufficient proofs of purchase
C. Lost or stolen products
D. Items that have expired their warranty period
E. Non-quality-related issues (after 30 days of purchase)
F. Free products
G. Repaired by a third party or modified by an individual
H. Damage from outside sources
I. Damage from misuse of products (including, but not limited to: resin leakage, falls, and operating devices improperly)
J. Normal discoloration, wear, or consumption during product use
K. The LCD screen cannot provide an SN code

 

Return & Refund Policy

1. For Unwanted Items

*This clause does not apply to Pre-owned & Refurbished items.

Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we refer to such a product as an "unwanted product".

A. For unopened products (with all original tags and labels attached), you can return them within 14 days of delivery for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.

B. For open-box and unused products, within 14 days of delivery, you can return them for a refund with an "unwanted reason". Original shipping charges are non-refundable (including free shipping products). Return shipping charges are the customer's responsibility (if ELEGOO provides a shipping label, the shipping fee will be deducted from the refund), and ELEGOO will apply a 5% restocking fee based on the order amount. The refund will be issued in the same currency as the purchase, minus any taxes, import duties, and original shipping charges.

C. For used products or orders beyond 14 days, refunds for unwanted products are not available.

Unwanted Issue

 

Product Status

Items

Responsibility of Both Original Shipping Charges and Return Shipping Charges

Restocking Fee

Deduction Fee

Refund

Within 14 Days

Unopened

Customer

5% based on the order amount

If the returned machine detects key parts missing, the corresponding fees will be deducted.

Open-box and unused

Customer

15% based on the order amount

Used

×

×

×

Within Warranty

All Status

×

×

×

×


Important:

1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.

2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

3. The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo's sole discretion.

2. For Quality-Related Items

*This clause does not apply to Pre-owned & Refurbished items.

Please note that all return requests must first be submitted to our official customer service team, and the package must be returned to our designated address (unless our customer service team recommends refusing the package), as failure to do so could result in liability for any lost items. Any return not confirmed and monitored by customer support may be lost.

A. Product is defective when you receive it, within 14 days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

B. Beyond the 14 days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

Quality-Related Issue

 

Items

Responsibility of Fees

Refund

Replace

Repair

Return Shipping Charges

Repair Fees

Within 14 Days

Elegoo

Elegoo

Within Warranty

×

×

×

Elegoo

Out of Warranty

×

×

×

Customer

 

Important:

1. If the customer service team/technical team confirms the return or exchange of the machine, the original machine must be sent out within 7 days (the return label provided by our company is valid for 7 days). Otherwise, it will be deemed that the plan has been abandoned. Subsequent contact with us will require re-troubleshooting and confirmation of the problem, and the time when the problem first occurred will also be reset. A refund or a new machine will be arranged after we receive the returned machine.

2. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

3. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

3. Process After Returning Product

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

 

Contact Us

Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

  1. For 3D Printer technical support: 3dp@elegoo.com

  2. For laser engraver technical support: lec@elegoo.com

  3. For order issues, unwanted item refunds, or returns: info@elegoo.com

  4. For STEM kits, robots technical support: service@elegoo.com

When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

Tilt Release Technology, Ultra Fast Printing

The Elegoo Saturn 4 Ultra adopts tilt release technology, which enables the model to be peeled off from the release film quickly by tilting the resin tank, achieving a fast printing speed up to 150mm/h. You can switch between the fast and slow print modes seamlessly as needed, enjoying a flexible and efficient printing.

Unmatched Details With 12K Mono LCD

With a 10-inch 12K mono LCD, the Saturn 4 Ultra boasts an incredible resolution of 11520x5120 and an XY resolution of 19x24μm, presenting you exquisite models with stunning clarity and precision.

COB & Fresnel Collimating Lens For Smoother Surface

When the COB light source emits light at 405nm with the combination of Fresnel collimating lens, it can achieve an ultra-low astigmatism coefficient of 0.5%, an exceptional field uniformity of 92%, and a precise angle deviation control below 5° on the forming surface, realizing accurate and even printing results with delicate finishing and intricate details.

Self-Check & Automatic Leveling Print Right Out Of The Box

The Saturn 4 Ultra brings hassle-free experience with its smart self-check and automatic leveling function. Simply unbox, power on, and print—making it ultimate printing experience.

One-Click Self-Check
With one single click, the Saturn 4 Ultra will perform a quick self-check to verify whether its components are working properly before your printing starts.

One-Click Automatic Leveling
Thanks to its intelligent mechanical sensor, the build plate will be automatically leveled every time once you click the button, saving your time and efforts.

AI Camera Intelligent Detection, Minimize Potential Loss

Experience failure detection and real-time monitoring of the printing status with the AI camera. The AI camera can effectively detect empty build plate and model warps, enabling you to promptly resolve issues, save your time and effort, and ensure high-quality prints.

Smart Mechanical Sensor, Enjoy Worry-Free Printing

Equipped with a mechanical sensor, the Saturn 4 Ultra supports residue detection to prevent damage to the LCD screen, as well as resin shortage and leveling failure alarm to further enhance the safety and reliability during printing.

Real-Time Monitoring And Time-Lapse Photography

Keep updated on your print progress, ensuring everything is running smoothly. Capture captivating time-lapse videos of your creations and share the excitement with others.

User-Friendly Design

ELEGOO is committed to providing users a convenient printing experience. From the quick-release design of the build plate to the dual pour spouts design of the resin tank, along with the drip tray design to prevent resin drips, the replaceable tank lock, and the flip-up cover design for effortless access, every detail has been carefully considered to make your operation easier and more comfortable.

Easily manage multiple printers simultaneously from one device. Whether you have one or more printers, you can efficiently manage your print projects once at a time.

Powered by self-developed system with 8G RAM, which guarantees stable file transfer and faster computing, the Saturn 4 Ultra offers a smoother and more efficient printing experience.

Experience seamless and user-friendly operation with the 4-inch capacitive touch screen, designed with a vertical layout and an intuitive interface.

PFA release film offers superior release performance, as its non-stick surface prevents the resin from adhering to the film, making it easier to peel off.

The Elegoo Mars Mate air purifier's built-in high-density activated carbon filter can effectively absorb resin odor, with the purification efficiency up to 95% for TVOC.

Designed with a solid metal body, the Saturn 4 Ultra can maintain its precision even after millions of printing layers.

What's In Box

Show More(9+)
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer
Find Your Ideal 3D Printer

Specification

BUILD VOLUME

218.88 x 122.88 x 220 mm³

PRINTING SPEED

MAX 150mm/h

LAYER THICKNESS

0.01-0.2mm

XY RESOLUTION

19x24μm(11520x5120)

Z-AXIS ACCURACY

0.02mm

PRINTING TECHNOLOGY

MSLA

LIGHT SOURCE

COB light source + Fresnel
collimating lens

LCD SCREEN SIZE

10-Inch 12K Mono LCD

LCD SCREEN PROTECTOR

9H hardness tempered glass

CONNECTION METHOD

USB offline printing & WiFi

SYSTEM

EL3D-4.0

SLICING SOFTWARE

CHITUBOX & Autodesk Fusion

OPERATING SCREEN

4.0-inch capacitive touch screen

LANGUAGE

Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese

AIR PURIFIER

USB connection unavailable, compatible with Mars Mate air purifier

OTHER FUNCTIONS

Tilt Release Technology, One-Click Self-Check, One-Click Automatic Leveling, AI Camera, Smart Mechanical Sensor, Power-Loss Resume Printing

RESIN

Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)

POWER REQUIREMENTS

100-240V 50/60 Hz 24V 6A

HEAT DISSIPATION METHOD

4 copper heat pipes + single fan

DIMENSIONS

327.4 x 329.2 x 548 mm³

NET WEIGHT

14.5kg

GROSS WEIGHT

19.3kg

Show More(16+)

FAQs

How long does delivery take after shipping?

1. In-stock Product: 3-7 workdays for delivery

2. Pre-owned Product: 4-8 workdays for delivery

3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

What countries do you ship to?

Click to view available countries

Do you offer free shipping service?

Orders over £40 qualify for FREE SHIPPING. Orders under £40 will incur a delivery fee of £11.90.

For orders shipped to the United Kingdom, we are responsible for paying customs duties.

Can I change the delivery address of my package after it has been shipped out?

Unfortunately, we cannot change the shipment once the product is shipped.

Is there a software license included with the Saturn 4 Ultra?

Yes, your purchase includes a 93-day free Chitubox Pro license.